袋式除尘器
袋式除尘器除尘效率高、运行稳定、适用范围广操作简单，是目前应用较多的除尘器含尘气体由除尘器进入箱体内，部分较粗的颗粒的粉尘由于受重力因素而直接沉降到灰斗内，另一部分微小的粉尘随气流附着在滤袋的表面，洁 净的空气则通过滤袋从箱体排行。
特点
1、除尘效率高；2、运行安全可靠、维护简单；3、袋式（或滤筒）除尘器采用IC控制系统，可使设备自动运行；
适用行业
袋式除尘器适用于木业、研磨、锻造、锅炉、焚化炉、窑业、化工、橡胶、塑料、水泥、制鞋、表面处理。袋式（或滤筒）除尘器除尘效率高、运行稳定、适用范围广操作简单，是目前应用较多的除尘器（除尘器 脉冲袋式除尘器）。
高负压中央集尘系统
高负压中央集尘系统广泛使用于工厂和装配间等区域，可提供经济高效的粉尘解决方案。我们可以根据实际情况设计安装高负压中央集尘系统，以满足工作中的要求。
技术参数
|
输入电压 |
380V-±10%，50HZ |
|
处理风量 |
>2000m³/h,可定做 |
|
真空负压力 |
<—29000pa |
|
整机耗电功率 |
视大小而定 |
|
工作环境温度 |
—30~60℃ |
|
净化率 |
>99.9%，符合国家排放标准（GB18483—2001） |
高负压中央集尘系统在工业领域中的应用
一、 高负压中央集尘系统 高负压中央集尘系统是国际上一种全新的生产清洁方式。高负压中央集尘系统通过安装在车间各吸尘口，通过人工或固定吸尘方式将各种粉尘、固体颗粒、可回收物等通过固定安装在墙壁上的快速接阀、集尘管道，传送到远离车间的主机内，操作人员只需使用由钢管和吸尘软管连接的吸尘扒头，就可以轻松在车间内完成清洁工作。
 二、高负压中央集尘系统的特点
1、吸力强劲、使用方便
与车间里使用移动式吸尘器不同，高负压中央集尘系统通过设计管路，主机安装就位后固定不动，与之配套，将废弃物统一收集在一个大容量的收集桶内，因而设计成具有强大的吸力和更长的使用寿命。高负压中央集尘系统提供功能、规格齐全的多种配件，每种配件都针对某种或几种清洁工作设计，可以方便、高效地进行清洁工作。由于车间内设置多处吸尘快速接阀，吸尘系统可供多人同时进行使用。
2、 多种配件适应各种不同需求： 根据现场操作要求设计的各种配套件。如扁口吸尘扒头、斜口吸尘扒头、三通等十几种均可作为工业吸尘器的终端选购件，这样可自如地进行清洁工作。
3、无二次污染、清洁环境： 传统的移动式工业吸尘器的过滤袋一般无法清洁极其细微的粉尘颗粒，这些粉尘颗粒由排气口重新回到车间里，二次污染了车间的环境。高负压中央集尘系统的主机部分一般固定在车间外的主机房内，且过滤材料选用进口基材的覆膜滤筒，通过此种过滤装置，清洁后可将粉 尘颗粒降至＜0.3μm，车间里无粉尘异味，创造更为清洁的车间环境。
4、降低车间噪音： 由于高负压中央集尘系统主机放置于车间外的机房内，降低了车间内的噪音，使工作环境得到进一步改善。
5、操作简便、节省用地空间： 由于车间内设置了多个快速接口，操作人员只要将吸尘软管直接插入快速接口中，便可以清洁工作，而且吸尘软管及配件尺寸小，节省了空间。
三、高负压中央集尘系统应用范围
1、建筑行业：宾馆、饭店、图书馆、实验室、医院、办公楼寓等；
2、机械工业：机械加工、炼钢、铸锻造、化工、制药等；
3、电子行：电子厂、仪表厂等；
 4、建材工业：陶瓷生产、玻璃制造、橡胶生产、水泥制造等；
电除尘器
电除尘器除尘效率高，通过加长电场长度方法提高捕集交率，使用三个电场的电除尘器，以捕集交率可达99%以上，设备阻力小，总能耗低，电除尘器的阻力一般仅为200-300pa，运行费用约占袋式除尘器的1/5。
使用范围
电除尘器适用范围广，可捕集粒径小于0.1的粒子、300-400℃的高温烟气。湿式电除尘不仅可除去烟气中的水雾和酸雾，还可以处理大风量烟气，结构易于模块化，因此可实现装置大型化。烟气处理量可达200×104m³/h,初始投资较大，粉尘排放尝试达到 ≤50mg/m³。
Industrial dust
Bag type dust collector
Bag type dust collector dust removal efficiency is high, stable operation, wide application range and simple operation, is currently the precipitator use more gas containing dust by dust collector dustfrom entering the box body part, coarse particles due to gravity factors and direct deposition to thedust bucket, the other part of tiny dust with air attached to the bag surface, clean air through thefilter bag from the box top.
Characteristic
one, the dust removal efficiency is high;two, the safe and reliable operation, simple maintenance; there, the bag (or cartridge) dust collector using IC control system, which can make the equipment run automatically
Applicable industry
Bag type dust remover is suitable for wood, grinding, forging, boiler, incinerator, ceramics,chemical, rubber, plastics, cement, shoemaking, surface treatment. Bag type (or filter cartridgededuster) efficiency high, stable operation, wide application range and simple operation, is now commonly used for collector (Collector pulse bag type dust collector).
High negative pressure central dust collection system
High negative pressure central dust collection systems are widely used in factories and assemblyrooms and other areas, can provide dust economically efficient solutions. We can according to the actual situation of the design and installation of high negative pressure central dust collection system, in order to meet the work requirements.
Technical parameters
|
The input voltage |
380V- + 10%, 50HZ |
|
Air handling |
>2000m /h can be customized to fand, |
|
Vacuum negative pressure |
< - 29000pa |
|
Consumed power |
Depending on the size of |
|
Working environment temperature |
30~60 C |
|
The purifying rate |
>99.9%, meet the national discharge standard (GB18483 - 2001) |
Application of high pressure central dust collection system in the field of industry
(one).A central dust collection system, high vacuum high negative pressure central dust collection systemis an international new clean production mode. High negative pressure central dust collection system by installing in the workshop dust mouth, through artificial or fixed vacuum mode will bevarious kinds of dust, solid particles, Recyclable matter by fixed installation on the wall of quick coupling valve, dust collecting pipeline, sent to far away from the workshop within the host, the operator only needs to use cleaner scraping heads connected by the steel tube and the vacuumhose, you can easily complete the cleaning work in the workshop.
The characteristics of two, high negative pressure central dust collection system
one, strong suction, easy to use
And the workshop in the use of mobile cleaner different, high negative pressure central dust collection system through the design of the pipeline, the host installing fixed, with matching, willwaste unified collection in collecting barrel of a large capacity, thus designed with strong suctionand longer in service life. A variety of accessories of high negative pressure central dust collectionsystem provides functions, complete specifications, each of the components in one or severalcleaning work design, can be conveniently and efficiently carry out cleaning work. Because multiplevacuum quick connecting valve is arranged in the workshop, dust collecting system for multiplesimultaneous use.
two, a variety of accessories to adapt to the different needs of various: according to the site operationthe design requirements of the various accessories. Such as the flat mouth suction head, oblique mouth cleaner grilled grilled head, three links and ten can be used as the terminal industry cleaneroptions, it can freely carry out cleaning work.
there, no two pollution, clean environment: filter bag traditional mobile industrial vacuum cleanersgenerally cannot clean dust particles is extremely subtle, these dust particles from the exhaust portback to the workshop, the workshop environment pollution two. High negative pressure central dust collection system of the host part of general fixed in the workshop of the host room, coated filter cartridge and filter material selection of imported substrate, through the filtering device, after cleaning the dust particles can be reduced to less than 0.3 m, the workshop dust free of peculiar smell, to create a more clean workshop environment.
four, reducing workshop noise: due to the high negative pressure central dust collection system hostplaced in the workshop outside the room, reduce the noise in the workshop, the working environment has been further improved.
five, the operation is simple, save space: as in workshop is provided with a plurality of fast interface,operating personnel as long as the suction hose directly into the fast interface, can the cleaning work, and vacuum hose and fittings of small size, saving space.
Three: high negative pressure in the range of application of the central dust collection system
one, the construction industry: hotels, restaurants, libraries, laboratories, hospital, office building etc.;
two, industrial machinery: machinery processing, steel making, forging and casting, chemical,pharmaceutical etc.;
three, electronic: electronic factory, instrument factory etc.;
four, building materials industry: production of ceramics, glass manufacturing, rubber production,cement manufacturing etc.;
Electric dust collector
The dedusting efficiency of the electrostatic precipitator is high, through the extended field length method improve the collecting rate of pay, esp using three field, to capture the exchange rate can reach more than 99%, small resistance, the total energy consumption is low, electric dust collector resistance is generally only 200-300pa, operating costs accounted for bag type dust collector. 1/5.
Range of use
Electrostatic precipitator of wide application range, high temperature flue gas can be trappedparticle size less than 0.1 particles, 300-400 C. Wet electric dust in the flue gas can not only remove mist and fog, but also can handle large volume of smoke, the modular structure is easy, so it can realize large-scale device. Flue gas processing capacity of up to 200 x 104m fand /h, initialinvestment is large, the dust emission is less than or equal to 50mg/m fand attempts to reach the. |
